What the Army article says
The points below are taken from the Army's own announcement, which is linked in the sources. This page does not add to them.
- A waist-to-height ratio of less than 0.55 is the benchmark for compliance.
- The waist is measured at the navel and divided by the Soldier's height in inches.
- Soldiers are assessed twice per calendar year.
- A Soldier at 0.55 or above gets a confirmation test from another team on the same duty day.
- Soldiers who do not meet the standard are flagged and enrolled in the Army Body Composition Program until they do.
- No separation actions for failing the ratio occur during the initial 180-day assessment period.
Policy details can change. Check the current Army directive or ask your unit before relying on this page.
Waist by height
The table shows the waist at which the ratio equals 0.55 for each height. To be under the standard your waist must be smaller than the figure shown.
| Height | Height in inches | Waist at a ratio of 0.55 |
|---|---|---|
| 4 ft 10 in | 58 in | 31.9 in |
| 5 ft 0 in | 60 in | 33.0 in |
| 5 ft 2 in | 62 in | 34.1 in |
| 5 ft 4 in | 64 in | 35.2 in |
| 5 ft 6 in | 66 in | 36.3 in |
| 5 ft 8 in | 68 in | 37.4 in |
| 5 ft 10 in | 70 in | 38.5 in |
| 6 ft 0 in | 72 in | 39.6 in |
| 6 ft 2 in | 74 in | 40.7 in |
| 6 ft 4 in | 76 in | 41.8 in |
| 6 ft 6 in | 78 in | 42.9 in |
| 6 ft 8 in | 80 in | 44.0 in |
The numbers are height times 0.55, rounded to a tenth of an inch. The Army's own measuring and rounding rules decide the official result.
Worked example
A Soldier who is 5 ft 10 in is 70 inches tall. With a 38 in waist at the navel, the ratio is 38 divided by 70, which is 0.54. That is under 0.55. With a 39 in waist the ratio is 0.56, which is not.
How this differs from health guidance
The Army figure is a military fitness standard. It is not the same as the health guidance for the general public, which describes a ratio below one half as the healthy range. NICE measures the waist midway between the lowest ribs and the top of the hips; the Army uses the navel. The waist-to-height ratio chart on this site covers the health bands.
This site is not affiliated with the Army or the Department of Defense.
Use your own numbers
The waist-to-height ratio calculator opens with this page's example filled in. Change any field and the result updates. Nothing you type is sent anywhere.
Frequently asked questions
What is the Army waist-to-height ratio standard?
A ratio of less than 0.55, according to the Army announcement of July 7, 2026.
How is the waist measured for the Army standard?
At the navel. The measurement is divided by height in inches to give the ratio.
What is the maximum waist at 5 ft 10 in?
The ratio reaches 0.55 at 38.5 inches, so the waist must be below that.
What happens if a Soldier is at 0.55 or above?
The Army article says the Soldier gets a confirmation test from another team the same duty day and, if the result stands, is flagged and enrolled in the Army Body Composition Program.
Is this an official Army calculator?
No. It is an independent page that repeats the published standard and does the arithmetic. Your unit and the current directive are the authority.
Related guides
Sources
- U.S. Army. Official Army news article on the waist-to-height body composition assessment. army.mil; published July 7, 2026. army.mil/article/293753